ALL IN ONE PACKAGE
200 Amp Panel and Service Upgrade
Professional and Certified
Electric Vehicle Charger installation
Professional Service
Smart Home Solution
Experiencing an Emergency?
Call 911. For All Other Urgent Needs, EZSMART is Here.

An electrical panel upgrade replaces the panel, main breaker, and often the incoming service that feed every circuit in your home. Most GTA homes built before the 1990s were wired for a very different household: no EV charger, no heat pump, no induction range, no basement apartment. If your panel is a 60-amp or 100-amp service — or still a fuse box — it was sized for a house that no longer exists.
EZSMART Corp is a licensed electrical contractor with a Master Electrician on staff and ECRA/ESA authorization on every permit we file. We handle panel upgrades across Toronto, North York, Scarborough, Etobicoke, Vaughan, Markham, Richmond Hill, and the wider GTA.
200 amps is the practical standard for a modern detached home in the GTA. It is not about wanting more power for its own sake — it is about whether an electrical load calculation under the Ontario Electrical Code says your planned loads fit.
A 100A service is often still fine for a smaller home with gas heat, gas range, gas dryer, and no EV. Add a Level 2 charger, electric range, or a second suite and that math usually fails. Upgrading to 200A is the difference between adding circuits freely for the next twenty years and paying for a second upgrade in three.
The honest answer is that nobody should quote you a panel size over the phone. A licensed electrician does the load calculation first, then recommends the service size.



A service upgrade is not a same-day swap. It involves three parties — your electrical contractor, the Electrical Safety Authority (ESA), and your local utility — and the sequence matters.
Which utility serves you changes the disconnect scheduling process, and it is the single biggest variable in how long your upgrade takes:
We deal with all three regularly and file the utility paperwork for you. Overhead services are generally faster and less expensive to upgrade than underground services, where the incoming conductors may also need attention.
Panel work at EZ Smart starts from $1,599. Where your job lands above that starting point depends on the condition of your mast and meter base, whether your service is overhead or underground, the panel location and cable run, how many circuits transfer, and whether the grounding needs updating.
Anyone who gives you a firm number without seeing the service is guessing. We provide a written quote after the site assessment, with the ESA permit fee stated in it, and the assessment is free.
We are fully licensed and insured, with a Master Electrician on staff and ESA authorization on every job. We file the permit, coordinate the utility disconnect, complete the work to the Ontario Electrical Code, and see the ESA inspection through to the Certificate of Inspection — you are not left chasing paperwork.
Every circuit gets properly labelled before we leave, so the next person who opens that panel — including a future inspector or buyer — can actually read it.
If your breakers are tripping, your panel is full, or you are planning an EV charger, addition, or basement suite, the load calculation is the place to start.
Call 416-838-9006, book a free estimate, or contact us.



We are locally owned and operated which makes our services causal as they are done by friendly and helpful technicians.
We started out in 2002. We are locally owned and operated which makes our services causal as they are done by friendly and helpful technicians. Our mission is to service each client with a highly trained and courteous technician that is dependable and always trustworthy.
Permanent Skilled & Certified Electricians
Skilled & Certified Labor

Electrical repairs should always be handled by a professional electrician.

Electrical panel maintenance, therefore, should be part of your regular routine.

Upgrading wire from Aluminum to Copper guarantee the safety of you and your family

An electrical surge can happen for a number of reasons, including lightning strikes.

Generators are a great way to protect your home or business from brownouts and power outages.

If you need an Emergency service in case of fire , overload or any incident get in touch to serve you

Outdoor Lighting can transform your outdoor living space completely.


24/7 emergency electrician you can trust.
Yes, we offer free estimates for electrical additions or replacements.
We strive to offer the lowest price on the market.
Yes. Every service or panel upgrade in Ontario requires an ESA notification, which is the permit. It has to be filed by a licensed electrical contractor — a homeowner cannot pull one for a main service upgrade. We file it for you and see the job through to the Certificate of Inspection.
The physical installation is usually most of a single working day. The overall timeline is driven by scheduling the utility disconnect, which commonly takes a couple of weeks depending on whether you are served by Toronto Hydro, Alectra, or Elexicon. ESA inspection follows shortly after the work is complete.
Panel work at EZ Smart starts from $1,599. Where your job lands above that depends on your mast and meter base condition, overhead versus underground service, panel location and cable run, and circuit count. We quote in writing after a free site assessment, with the ESA permit fee stated in the quote.
No. A main service upgrade involves the utility connection and cannot be done under a homeowner permit in Ontario. Beyond the legal issue, working in a panel with a live incoming service is genuinely dangerous — the main lugs stay energized even with the main breaker off.
Yes, for most of the working day while the service is disconnected, the new panel is installed, and circuits are transferred. We schedule the disconnect with your utility in advance and let you know the window so you can plan around it.
Not always, but often. A Level 2 charger draws 32-48A continuously. On a 100A service already running central A/C, an electric dryer, and a range, a load calculation frequently comes back over capacity. Load management devices are sometimes an alternative — we run the calculation and tell you honestly which applies.
Often yes. An obsolete fuse box, a Federal Pacific or Zinsco panel, or an undersized 60A service shows up in every home inspection and becomes a price negotiation. A documented upgrade with an ESA Certificate of Inspection removes that objection.
We currently employ a team of fully qualified electricians and a number of apprentices. We have been registered with he ESA/ECRA and therefore all our electricians are Licensed and registered. Our aim is to keep our services high and our prices very competitive.
Our electrical repair and service options are proudly offered to clients. Give us a call today to schedule a free service estimate!
We use cookies to improve your experience on our site. By using our site, you consent to cookies.
Manage your cookie preferences below:
Essential cookies enable basic functions and are necessary for the proper function of the website.
These cookies are needed for adding comments on this website.
Statistics cookies collect information anonymously. This information helps us understand how visitors use our website.
Google Analytics is a powerful tool that tracks and analyzes website traffic for informed marketing decisions.
Service URL: policies.google.com (opens in a new window)
SourceBuster is used by WooCommerce for order attribution based on user source.
Marketing cookies are used to follow visitors to websites. The intention is to show ads that are relevant and engaging to the individual user.
Google Maps is a web mapping service providing satellite imagery, real-time navigation, and location-based information.
Service URL: policies.google.com (opens in a new window)