A wiring upgrade replaces the aging cable behind your walls with modern, code-compliant wiring. In a lot of Toronto homes that is not a luxury upgrade. It is the difference between an insurable house and one an underwriter refuses to touch.
Toronto has an enormous stock of pre-1950 housing, which means knob-and-tube is still in service in neighbourhoods across the city. Homes built between the mid-1960s and late 1970s often have aluminum branch wiring instead. Both create real problems, and both have a proper fix.
EZSMART Corp is a licensed electrical contractor with a Master Electrician on staff. We rewire homes across Toronto, North York, Scarborough, Etobicoke, and the wider GTA, and we handle the ESA paperwork from permit through to Certificate of Inspection.
What Is a Wiring Upgrade?
A wiring upgrade means replacing existing branch circuits and, where needed, the feeders that supply them. Depending on what is in your walls, that can mean a full rewire or targeted remediation.
Knob-and-tube has no ground conductor and its insulation becomes brittle with age. It was never designed for the load a modern home puts on it, and it is unsafe to bury in insulation. The accepted fix is replacement.
Aluminum branch wiring is a different problem. Aluminum expands and contracts more than copper, so terminations loosen over time and overheat at outlets and switches. A full rewire is not always necessary here — pigtailing every device with ESA-approved connectors is a recognised remediation.
Which one applies to your home is not a guess. It is determined by opening devices and inspecting what is actually there.
Signs You Need This Service
- Your insurer asked about knob-and-tube or aluminum wiring. The most common trigger, and usually the most urgent one.
- Two-prong outlets throughout the house. No ground means no protection for modern electronics or appliances.
- Warm switch plates or outlets. A classic sign of a loose aluminum termination.
- Breakers tripping on circuits that were previously fine. Often a sign that old wiring is degrading or overloaded.
- Cloth-covered cable visible in the basement. Brittle insulation that flakes when moved.
- You are renovating or finishing a basement. Open walls are the cheapest time to rewire, by a wide margin.
- Buying or selling. Home inspectors flag both wiring types, and it becomes a condition of closing.
Benefits of a Professional Wiring Upgrade
Fire risk drops. Deteriorating insulation and loose connections are among the leading causes of residential electrical fires. Replacing them removes the cause rather than monitoring it.
Your home becomes insurable. Once the work is documented with an ESA Certificate of Inspection, most insurers will write or reinstate coverage.
Grounded, protected circuits. New wiring brings proper grounding, and GFCI and AFCI protection where the Ontario Electrical Code requires it.
Capacity for how you actually live. Modern circuits support the loads old wiring never anticipated.
Resale value. Documented electrical work removes a major objection before it is raised.
Why Choose EZ Smart
We are fully licensed and insured, with ESA authorization on every job. We file the permit, do the work to the Ontario Electrical Code, and see the inspection through to the Certificate — you are not left chasing paperwork with your insurer.
Rewiring is invasive work, so how it is done matters. We fish cable through finished walls wherever it is possible, keep access holes small and in sensible places, protect floors and furniture, and clean up daily. Every circuit is labelled properly before we leave.
If a full rewire is not warranted, we will tell you. Plenty of aluminum-wired homes are served better by proper pigtailing than by tearing the house apart.
Our Process
- Assessment: we open devices and inspect what is actually in the walls, then confirm the scope.
- Written quote: clear scope, stating what is included and what is not.
- ESA permit: we file the notification as the licensed contractor.
- Rewiring: circuits replaced in a planned sequence to limit how long any area is without power.
- Devices and panel: new outlets, switches, and connections landed and labelled.
- Testing and ESA inspection: we test everything and meet the inspector on site.
- Certificate and walkthrough: you receive the Certificate of Inspection for your insurer.
Related Services