EZSMART Corporation, ESA/ECRA #7012690 , North York , Ontario
Mon-Fri 08:00 AM - 05:00 PM
Rooftop solar panels are the fastest-growing residential electrical addition in Ontario, with tens of thousands of GTA homeowners now generating some or all of their household electricity from the sun. The question that comes up every week on homeowner forums is whether you can install your own solar panels and skip the installer markup. This […]
Adding a new switch, receptacle, or fixture to an existing wall almost always means cutting a hole for an “old work” electrical box — a box specifically designed to install in finished drywall without opening the wall behind it. Done right, the box is flush, secure, and ready to accept a device with no drywall […]
Retiring a light fixture, removing an unused receptacle, or eliminating a switch during a renovation — all of these leave behind live wires that need to be capped off safely. “Wrap it with tape and shove it in the wall” is not the answer. The Ontario Electrical Safety Code has specific rules about how live […]
An outlet or switch that fails after a few years is almost never a bad device — it is a screw terminal that was never tightened properly on the day it was installed. Loose screws generate heat, heat generates arcing, arcing generates fires. This guide walks GTA homeowners through how to properly tighten screw terminals […]
Ceiling fans look approachable in the online tutorials — hang the bracket, connect the wires, mount the fan, done. In practice, an Ontario ceiling fan install has several places where a first-timer gets stuck, and one place where a shortcut becomes a serious safety issue. This guide walks GTA homeowners through whether a beginner can […]
A hot tub is one of the highest-current, highest-voltage residential loads in a typical Ontario backyard — wet, weather-exposed, and often installed exactly where a novice DIYer would run into trouble. So the question comes up often on GTA homeowner forums: can I wire the hot tub myself? This guide walks Ontario homeowners through what […]
Replacing a thermostat is one of the most homeowner-friendly HVAC electrical jobs in an Ontario home — low voltage, small number of conductors, and a real energy-savings payoff when the new unit is programmable or smart. This guide walks GTA homeowners through how to replace a thermostat for a residential HVAC system safely, which wire […]
EV chargers are one of the fastest-growing residential electrical installations in Ontario, and every GTA homeowner who just bought an EV has asked the same question — can I install my own EV charger and save the electrician fee? The short answer sits at the intersection of the Ontario Electrical Safety Code, the Electrical Safety […]
A DIY electrical project that works today can still fail an ESA inspection tomorrow, and the gap between “it works” and “it is up to code” is exactly where insurance claims and home-sale disputes live. Ontario homeowners doing their own electrical work under a Homeowner Wiring Notification need to hit both bars — functional and […]
Every DIY electrical project in an Ontario home involves cutting cable to length and stripping insulation off the conductors. Do it with the right tool and the job takes ten seconds per splice; do it with the wrong tool and you either nick the copper (creating a hot spot that fails later) or spend twenty […]
