loading
EZSMART Corp, ESA/ECRA #7012690 , North York , Ontario
Mon-Fri 08:00 AM - 05:00 PM
EZSMART Corp, ESA/ECRA #7012690 , North York , Ontario
Mon-Fri 08:00 AM - 05:00 PM
Post Image
15 Nov, 2026
Posted by Amir Azimipour
0 comment

Can a Lightning Strike Travel Through House Wires?

Yes — and it does regularly, even when lightning strikes far from your home. Understanding how surge current travels through your electrical system helps you protect the equipment and appliances that depend on it.

How lightning enters a home’s wiring

A direct strike to your home or the power lines serving it sends an enormous voltage surge — potentially millions of volts — through the service entrance and into your home’s wiring. But direct strikes are relatively rare. The more common scenario is an induced surge: lightning strikes within a kilometre of your home, and the electromagnetic pulse induces a voltage surge in the overhead service wires. That surge travels through the meter and breaker panel into every branch circuit. A 2019 Insurance Bureau of Canada report identified lightning-related electrical damage as one of the top ten causes of homeowner insurance claims in Ontario.

What surge current damages

Modern electronics — televisions, computers, home theatre systems, smart appliances, Wi-Fi routers — have microprocessors and sensitive integrated circuits that can be destroyed by a surge of only a few hundred volts above normal operating voltage. Lightning-induced surges typically reach tens of thousands of volts at the service entrance. Even a heavily attenuated surge that reaches electronics after traveling through the panel can destroy circuit boards instantly.

Whole-home surge protection

A whole-home surge protector (also called a service entrance surge protector or Type 1 SPD) installs at the electrical panel and clamps incoming surges before they reach branch circuits. It doesn’t stop all surge current, but it reduces a 50,000V surge to a few hundred volts — within the range that point-of-use surge bars can then handle. The combination of a panel-level SPD and point-of-use surge bars at electronics provides the best protection. A panel-level SPD installed by a licensed electrician typically costs $300–$600 installed.

Expert tip

The most common misconception about surge protection is that a power bar with a “surge protector” label is sufficient on its own. Most cheap surge bars are rated for 300–600 joules — a severe lightning-induced surge can deliver 10,000+ joules at the panel. Without a service entrance SPD absorbing the bulk of the energy, the surge bar’s metal oxide varistors (MOVs) are simply overwhelmed. Install the panel-level SPD first, then add quality point-of-use bars (1,000+ joule rating) at your high-value electronics. This two-layer approach is what electricians use in their own homes.

Contact us

Want whole-home surge protection installed? Call us at 416-838-9006 or visit our contact page — we install service entrance surge protectors across the GTA.

Amir Azimipour

Electrician Since 2008 Journeyman Electrician Designated Master Electrician at EZSMART Corp

Recent Comments

No comments to show.

Archive

November 2026
MTWTFSS
 1
2345678
9101112131415
16171819202122
23242526272829
30 

Recent Posts

15 Nov, 2026

Are Tamper-Resistant Outlets Actually Effective?

Tamper-resistant (TR) outlets have been mandatory in new residential c

14 Sep, 2026

EV Charger Installation Cost in Ontario

EV Charger Installation Cost in Ontario Installing a home EV charger i

Click to chat with us