Tamper-resistant (TR) outlets have been mandatory in new residential construction across Canada and the US for over a decade. But do the spring-loaded shutters that make them harder to insert objects into actually prevent injuries? The evidence is clearer than most homeowners realize.
Standard outlets have open slots that allow anything — a fork, a key, a hairpin — to contact live conductors. Tamper-resistant outlets have spring-loaded plastic shutters behind each slot that only retract when equal, simultaneous pressure is applied to both slots at once, as a plug’s two prongs would do. Inserting a single object into one slot can’t push one shutter open alone — the opposing shutter holds. This design prevents the classic child-injury scenario of poking a single object into an outlet.
According to the Electrical Safety Foundation International (ESFI), approximately 2,400 children in the US suffer shock injuries from electrical outlets each year, with young children between ages 2 and 4 at the highest risk. Research by the CPSC found that tamper-resistant outlets significantly outperform plastic plug covers as a protective measure: plug covers can be removed by children (and frequently are), while TR shutter mechanisms cannot be defeated by a child’s typical single-finger or single-object probing. Ontario’s Electrical Safety Authority endorsed TR outlets as standard for the same reason — passive protection requires no ongoing behavior from occupants.
TR outlets are not a complete electrical safety solution. They protect against the specific scenario of foreign object insertion into unused outlets. They do not protect against unsafe cords, overloaded circuits, damaged plugs, or the outlet itself failing. They also don’t substitute for GFCI protection in wet locations — a TR-only outlet near a bathroom sink still poses shock risk if a device falls into water. For bathrooms, kitchens, garages, and outdoor outlets, GFCI protection is required by code and must be present alongside tamper resistance.
TR outlets are marked with the letters “TR” embossed between the slots. If your home was built or renovated after approximately 2009–2010, the outlets likely already have TR shutters. Older homes may not. Replacing standard outlets with TR outlets is a straightforward swap that takes about 10 minutes per outlet with the breaker off — no wiring changes required. TR outlets cost $2–$5 each at hardware stores, making a full-home upgrade relatively inexpensive.
When we do electrical upgrades in older homes with young children, upgrading standard outlets to TR throughout the house is one of the first things we recommend — it’s low cost, takes half a day, and removes a real hazard permanently. The spring mechanisms in quality TR outlets (Leviton, Hubbell, Legrand) hold up for decades and don’t degrade meaningfully over time. One thing to test: if you buy an outlet and can open one shutter with a single pencil, the mechanism is defective — return it. A properly functioning TR outlet requires simultaneous bilateral pressure to open.
Want to upgrade your home’s outlets to tamper-resistant or add GFCI protection? Call us at 416-838-9006 or visit our contact page — we upgrade outlets across the GTA.
Electrician Since 2008 Journeyman Electrician Designated Master Electrician at EZSMART Corp