An unexplained burning smell or sharp ozone odour in your home is one of the electrical warning signs you should never ignore. Here’s what causes these smells, what they indicate, and when to treat them as an emergency.
Ozone has a sharp, metallic, or “after-thunderstorm” smell. It’s produced by electrical arcing — when current jumps across a gap, the energy splits oxygen molecules into ozone. Inside a wall or electrical box, arcing at a loose connection or damaged wire produces ozone that can permeate through outlet covers and wall plates. If you smell ozone near an outlet, switch, or in a room with no obvious source (no ozone-generating devices like air purifiers), arcing in the wiring is a probable cause. This is a fire hazard and should be investigated by a licensed electrician promptly.
A burning plastic or acrid smell often indicates wire insulation overheating. This happens when a circuit is overloaded continuously (not enough to trip the breaker, but enough to heat the wiring beyond safe operating temperature), when a loose connection creates resistance and heat at a termination point, or when a device is failing internally. The smell may be strongest near the electrical panel, a specific outlet, or an appliance. If the smell is at the panel, turn off the main breaker and call an electrician. If it’s near an outlet or appliance, unplug everything on that circuit and investigate.
Some overheating electrical components — particularly certain plastic outlet bodies, arc fault breakers, and older wiring insulation — produce a fishy or urine-like smell when they overheat. This is frequently reported but widely misidentified as a plumbing issue. If you smell something like fish or ammonia and can’t trace it to food or drains, check your outlets, switches, and electrical panel as a possible source. This smell from electrical components almost always indicates overheating.
Any burning electrical smell accompanied by discoloured outlets, flickering lights, a tripping breaker, or visible scorch marks is an emergency. Evacuate if the smell is strong and you can’t locate the source. Call 911 if you have any reason to believe a fire has started inside a wall. Do not dismiss an electrical smell as “just a burning dust” smell after the heat comes on — that’s a different and benign smell. Electrical burning has a distinct quality: acrid, plastic, or metallic.
The most dangerous scenario with electrical smells is intermittent arcing — a loose connection that arcs occasionally, produces a brief ozone smell, and then stops when the arc self-extinguishes. The homeowner notices the smell a few times, can’t reproduce it, and assumes it’s resolved. It isn’t. Intermittent arc faults are the leading cause of electrical fires that start inside walls without any breaker trip. Installing AFCI breakers on circuits where you’ve noticed unexplained ozone smells is both a diagnostic tool (AFCIs detect arcing patterns) and a fire prevention measure.
Noticing a burning or ozone smell and not sure where it’s coming from? Call us at 416-838-9006 or visit our contact page — we diagnose electrical odour problems across the GTA.
Electrician Since 2008 Journeyman Electrician Designated Master Electrician at EZSMART Corp