EZSMART Corporation, ESA/ECRA #7012690 , North York , Ontario
Mon-Fri 08:00 AM - 05:00 PM
Electric baseboard heaters are common supplemental or primary heat in Toronto and GTA homes, and every one of them needs a thermostat wired into the circuit — either a built-in unit on the heater itself or a wall-mounted line-voltage thermostat controlling one or more heaters. This guide covers how that wiring actually works, why it […]
Running a new circuit across a ceiling in a Toronto or GTA attic or basement almost always means crossing joists, and where you drill matters as much for the structure as for the wiring. This guide covers the actual placement rules — hole location, nail plates, and when notching instead of drilling is (and is […]
Running new cable through a Toronto or GTA renovation eventually means securing it to the framing, and stapling is the standard method. The question homeowners get wrong is not whether stapling is allowed — it is how, how often, and with what staple. Get any of those wrong and the cable jacket takes the damage […]
Lever-style connectors, popularized by the brand Wago, have become a common alternative to the twist-on wire nut in Toronto and GTA electrical work. Both are legitimate, code-accepted connection methods when used correctly — but they are not interchangeable in every situation, and each has a distinct correct technique. This guide covers how to use both […]
Open a device box in a Toronto or GTA home and find melted, discoloured plastic around a wire nut or a device terminal, and you have found a genuine near-miss. Connections do not melt from normal use — something specific went wrong at that exact point. This guide covers why melting happens almost exclusively at […]
Every wire splice in a Toronto or GTA home has to live somewhere specific: a listed junction box that stays accessible, not buried inside a finished wall. Homeowners often ask whether a junction box can be hidden behind drywall, under flooring, or inside a closet — and the answer is more nuanced than a flat […]
A nicked conductor looks fine at a glance and fails quietly months later. Getting a clean strip — insulation off, copper untouched — is one of the most basic electrical skills and one of the most commonly botched by anyone reaching for a utility knife instead of the right tool. This guide covers the technique […]
Topping up attic insulation is one of the most common DIY and contractor projects in Toronto and GTA homes, and it almost always means burying existing electrical cable under a foot or more of batts or blown-in fill. Homeowners reasonably worry: is that a fire risk? The answer splits cleanly between modern cable and one […]
Two-prong outlets throughout a Toronto or GTA home are the giveaway: the wiring predates the grounding conductor that modern circuits carry as standard. Homeowners often ask whether they can simply add a ground somehow, or whether a full rewire is the only fix. There are real, code-compliant middle paths. This guide covers exactly how grounding […]
Open an attic hatch or a basement ceiling in a Toronto or GTA home built before the 1960s and you might find wiring wrapped in a woven fabric jacket instead of the smooth plastic sheath on modern cable. That is cloth-covered wiring, and the honest answer on whether it is a fire hazard is: it […]
