EZSMART Corporation, ESA/ECRA #7012690 , North York , Ontario
Mon-Fri 08:00 AM - 05:00 PM
Running an electrical cord under a rug is one of the most common electrical fire hazards in Canadian homes, and it is also one of the easiest to overlook. The cord is hidden, the room looks tidy, and nothing seems wrong — until heat builds up where no one can see it. Is It Safe […]
A GFCI receptacle that trips and will not reset — or< that resets briefly and trips again immediately is one of the most common electrical service calls in Ontario homes. The behaviour is often misread as a faulty GFCI device, but in most cases the GFCI is doing exactly what it is designed to do: […]
Closets in Ontario homes are subject to specific wiring restrictions under the Ontario Electrical Safety Code (OESC). The rules exist because closets — particularly bedroom and hallway closets — are spaces where combustible materials (clothing, linens, boxes) are stored in close proximity to light fixtures and wiring. Understanding what the code permits and prohibits in […]
An attic exhaust fan moves hot, humid air out of the attic space and replaces it with outside air drawn through soffit vents. Excessive attic heat — common in Ontario summers — accelerates shingle degradation, raises cooling loads for the living space below, and creates condensation risks in winter. Installing an attic exhaust fan is […]
Before cutting into any wall to install an outlet box, a light fixture, or a cable pass-through, homeowners need to determine whether the wall is load-bearing. Cutting into or significantly weakening a load-bearing wall without proper structural support can cause serious structural damage. The Electrical Safety Authority (ESA) and the Ontario Electrical Safety Code (OESC) […]
Extension cords that are coiled and stored incorrectly develop kinks, internal wire damage, and insulation stress that shortens their usable life and creates fire hazards. Proper coiling technique preserves the cord’s geometry, keeps the insulation intact, and makes the cord tangle-free when it is next unrolled — which matters both for ease of use and […]
Extension cords are sold and marketed as temporary solutions — and the Ontario Electrical Safety Code (OESC) treats them that way. Using an indoor extension cord as a permanent wiring method is a code violation, a fire hazard, and an insurance risk. Understanding what “permanent” means in this context, and why the distinction matters, helps […]
Installing a smart thermostat in an Ontario home is straightforward when the existing heating system already has a 24-volt control wire (called a C-wire or common wire) running to the thermostat location. When that wire is absent — common in older furnaces and boilers — the smart thermostat needs a reliable 24-volt common connection to […]
The terms “load” and “line” appear on outlets, switches, GFCI receptacles, and AFCI breakers — and using the wrong terminal for the wrong wire is one of the most common wiring errors that causes protection failures and code violations in Ontario homes. Understanding what each terminal is for, and why the distinction matters, is foundational […]
Mounting a TV and hiding the cables behind the wall is a popular home improvement project — and one where the electrical requirements depend entirely on how you plan to power the TV. The cable management part of the project is straightforward low-voltage work. The power part, however, may require an ESA permit and an […]
