EZSMART Corporation, ESA/ECRA #7012690 , North York , Ontario
Mon-Fri 08:00 AM - 05:00 PM
Every DIY electrical project in an Ontario home involves cutting cable to length and stripping insulation off the conductors. Do it with the right tool and the job takes ten seconds per splice; do it with the wrong tool and you either nick the copper (creating a hot spot that fails later) or spend twenty […]
A digital multimeter is the tool that turns “the outlet does not work” into “the outlet has 0 V hot to neutral, 118 V hot to ground — open neutral upstream.” It answers questions a non-contact voltage tester cannot. This guide walks GTA homeowners through how to use a digital multimeter for home electrical testing, […]
A non-contact voltage tester (NCVT) is the cheapest piece of gear a homeowner can own that reliably prevents electrical shocks. Point the tip at a wire, hear a beep, know it is live. But the tester is only as trustworthy as the person using it, and there are five specific mistakes that turn a $25 […]
Every DIY electrical accident in Ontario has a common opening — the homeowner thought power was off when it was not. Turning off power sounds like the simplest step, but the number of ways to get it wrong is surprisingly large. This guide walks GTA homeowners through how to safely turn off power before starting […]
Every DIY electrical project in an Ontario home — replacing a switch, installing a dimmer, adding a ceiling fan — gets faster, safer, and more code-compliant with the right handful of tools. The good news is the starter kit is short. A dozen items covers 90% of homeowner-permitted work under the Ontario Electrical Safety Code, […]
