EZSMART Corporation, ESA/ECRA #7012690 , North York , Ontario
Mon-Fri 08:00 AM - 05:00 PM
No, a tripped breaker cannot “fix itself.” Once a circuit breaker has tripped, it is physically locked in the “off” or “tripped” (center) position. It will remain in this state, cutting off power to that circuit, until you manually reset it.
If a breaker seems to reset on its own, it is almost certainly a sign of a failing component or a loose connection that requires immediate attention from a professional.
A breaker trips when the electrical load exceeds the circuit’s capacity or when a short circuit occurs. It is a vital safety feature designed to prevent electrical fires.
Overloaded Circuit: You have too many high-wattage appliances running on one circuit.
Short Circuit: A “hot” wire is touching a “neutral” or “ground” wire, causing a massive surge of current.
Ground Fault: Current is leaking from the circuit into a grounding path, often caused by moisture.
If your power goes out and suddenly comes back on without you touching the panel, you have a serious electrical hazard.
Loose Connections: Terminals inside the panel may be loose, causing intermittent power. These create “arcing,” which generates intense heat and is a leading cause of electrical fires.
Failing Breaker: A breaker that trips and resets sporadically is internally damaged. A study by the Electrical Safety Foundation International (ESFI) highlights that electrical failures are a primary cause of home fires, with thousands of incidents reported annually.
Arc Faults: Modern homes use Arc-Fault Circuit Interrupters (AFCIs). These are sensitive enough to detect “micro-arcs” caused by damaged cords or faulty wiring. If these are tripping and resetting, your wiring insulation is likely compromised.
If you find a breaker in the tripped position, do not just flip it back to “on.” Follow this safe procedure:
Unplug devices: Turn off or unplug all items drawing power from that circuit to reduce the load.
Fully reset the handle: Move the breaker handle firmly to the “OFF” position (you will often hear a click), then push it firmly into the “ON” position.
Monitor the circuit: If the breaker trips again immediately, you have a hard short circuit. Do not force it to stay on. Call a licensed electrician.
Before resetting a breaker, touch the breaker handle or the panel cover nearby (with the back of your hand). If it feels unusually warm to the touch, do not attempt to reset it. This indicates a significant thermal issue or a “high-resistance connection.” In this scenario, turn off the main power to your home and contact an electrician immediately to prevent a potential fire.
DIY checks did not bring it back? We will fix that today. Call 416-838-9006 or visit our contact page for same-day service.
Electrician Since 2008 Journeyman Electrician Designated Master Electrician at EZSMART Corp
