EZSMART Corporation, ESA/ECRA #7012690 , North York , Ontario
Mon-Fri 08:00 AM - 05:00 PM
The standard outlet spacing in a bedroom is designed to make sure no point along the wall is too far from a convenient power source. In Canada, bedroom receptacle placement is governed by the Ontario Electrical Safety Code (OESC), which is based on the Canadian Electrical Code requirements for residential wiring.
For most homes, electrical outlets in bedrooms must be placed so that no point along the usable wall space is more than 1.8 metres (6 feet) from a receptacle. This allows homeowners to plug in lamps, chargers, electronics, and other devices without relying heavily on extension cords.
Bedroom outlets are typically spaced a maximum of 3.6 metres (12 feet) apart along the wall.
This spacing rule works because a standard electrical cord can usually reach up to 1.8 metres (6 feet) in either direction, allowing every section of usable wall space to have access to power.
The goal is convenience and safety by reducing the need for extension cords.
Yes. Bedrooms must have enough receptacles to meet spacing requirements, but the exact number depends on the size and layout of the room.
A small bedroom may only require a few outlets, while a larger bedroom may need additional receptacles to meet the required spacing.
Electricians consider the usable wall space, room layout, and furniture placement when installing outlets.
No. Not every wall requires an outlet if the required spacing is maintained.
Walls interrupted by features such as:
may not count as usable wall space when determining outlet placement.
Yes. Modern residential receptacles in Canada are generally required to be tamper-resistant unless a specific exception applies.
Tamper-resistant outlets include internal shutters that help prevent children from inserting objects into the slots, improving electrical safety in homes.
Yes, many bedroom circuits require arc fault protection under current electrical safety requirements.
AFCI (Arc Fault Circuit Interrupter) protection helps reduce the risk of electrical fires by detecting dangerous electrical arcing caused by damaged wiring, loose connections, or faulty devices.
Depending on the installation, AFCI protection may be provided through an AFCI breaker, AFCI receptacle, or another approved method.
Yes. Adding extra outlets is a common electrical upgrade during renovations.
Additional receptacles are often installed for:
Before adding outlets, the existing circuit should be checked to confirm it can safely handle the additional electrical load.
There is no single universal height requirement for standard bedroom outlets in most residential applications, but many are installed approximately 300 mm (12 inches) above the finished floor to the bottom of the electrical box.
The final height may vary depending on building design, accessibility needs, furniture placement, and local requirements.
Yes. Installing outlets near each side of the bed improves convenience and reduces the need for extension cords.
Many homeowners add outlets with:
Proper placement during construction or renovation can make a bedroom much more functional.
Incorrect outlet planning can create inconvenience and safety issues.
Common mistakes include:
You should contact a licensed electrician if:
A professional electrician can ensure new outlets are installed safely and comply with Ontario electrical requirements.
Modern bedrooms use far more electrical devices than they did decades ago. Phones, laptops, televisions, smart devices, and home office equipment have increased the demand for convenient outlets. During renovations, homeowners should consider future needs and install outlets where they will actually be used rather than only meeting the minimum requirements.
Bedroom outlets are generally spaced so that no usable wall section is more than 1.8 metres (6 feet) from a receptacle, resulting in approximately 3.6 metres (12 feet) maximum spacing between outlets.
Yes. Additional outlets can be added if the existing electrical circuit has enough capacity and the installation meets code requirements.
Extension cords should not be used as a permanent solution. Adding properly installed outlets is safer and more convenient.
Standard bedroom outlets typically do not require GFCI protection unless they are located in areas where GFCI protection is required, such as near certain wet locations.
Proper outlet spacing in a bedroom improves safety, convenience, and everyday comfort. Following Ontario electrical requirements ensures that power is available where you need it while reducing dependence on extension cords and power bars.
If your bedroom needs additional outlets, electrical upgrades, or a safety inspection, the licensed electricians at EZ Smart can help. We provide professional, code-compliant electrical services throughout Ontario.
Call us today: 416-838-9006
Contact Us to schedule an electrical inspection or request a free estimate.
